BOSS 302 Exchange

BOSS 429 Forums => BOSS 429 General Discussion => Topic started by: crossboss on August 09, 2019, 04:15:42 pm

Title: Boss 429 engine dimensions
Post by: crossboss on August 09, 2019, 04:15:42 pm
Boys,
Need some help…what are the measurements of the Boss 429 engine from the rear of the block (where the bell housing bolts to) all the way to the front of the water pump. Thanks in advance.
Title: Re: Boss 429 engine dimensions
Post by: flyingfred on August 09, 2019, 08:50:51 pm
Boys,
Need some help…what are the measurements of the Boss 429 engine from the rear of the block (where the bell housing bolts to) all the way to the front of the water pump. Thanks in advance.

30 5/16 inches to the water pump pulley flange on the water pump.

-Fred-
Title: Re: Boss 429 engine dimensions
Post by: crossboss on August 10, 2019, 07:41:29 am
Boys,
Need some help…what are the measurements of the Boss 429 engine from the rear of the block (where the bell housing bolts to) all the way to the front of the water pump. Thanks in advance.

30 5/16 inches to the water pump pulley flange on the water pump.

-Fred-




 Thanks, Fred!
Title: Re: Boss 429 engine dimensions
Post by: RmK57 on August 10, 2019, 08:13:20 pm
   If your using a regular 429-460 pump add 5/8".
Title: Re: Boss 429 engine dimensions
Post by: flyingfred on August 11, 2019, 08:14:30 pm
Boys,
Need some help…what are the measurements of the Boss 429 engine from the rear of the block (where the bell housing bolts to) all the way to the front of the water pump. Thanks in advance.

30 5/16 inches to the water pump pulley flange on the water pump.

-Fred-




 Thanks, Fred!

If you want to measure anything else, the engine is on my stand waiting to jump into the car.  ;) Come on by as you are close to my place!!

-Fred-
Title: Re: Boss 429 engine dimensions
Post by: crossboss on August 12, 2019, 06:43:44 am
Boys,
Need some help…what are the measurements of the Boss 429 engine from the rear of the block (where the bell housing bolts to) all the way to the front of the water pump. Thanks in advance.

30 5/16 inches to the water pump pulley flange on the water pump.

-Fred-




 Thanks, Fred!

If you want to measure anything else, the engine is on my stand waiting to jump into the car.  ;) Come on by as you are close to my place!!

-Fred-



Fred,
Thanks for the offer. I don't live in the Valley anymore…Im in Houston!
-Scott.