Author Topic: Hood paint dimension question.  (Read 1114 times)

0 Members and 1 Guest are viewing this topic.

Offline 0f02r

  • Senior Member
  • ****
  • Posts: 603
Hood paint dimension question.
« on: February 11, 2006, 04:49:55 pm »
I have seen the hood paint dimensions on the B1 website but the measurments are for the sides, I think 1 and 5/16ths--not sure but my question is....Is it the same for the front of the hood.   Is the paint width the same around the entire hood--except the back.  

Would really like to hear from some original paint car owners or from someone that has had the same question answered..

thanks

m

Offline Wilks

  • Cool Newbie
  • **
  • Posts: 93
Hood paint dimension question.
« Reply #1 on: February 11, 2006, 07:35:31 pm »
My car is at my off site garage I will get you some measurements when I go over to it next weekend.

Mike
0 Boss 302 4:30 TL with Oil cooler
71 Boss 351 11,000 mile survivor


Offline 4DMuscle

  • Senior Member
  • ****
  • Posts: 300
Hood paint dimension question.
« Reply #2 on: February 11, 2006, 11:02:28 pm »
I took measurements from my original hood striping and the numbers at the Boss Registry (www.boss351registry.com) are good. A couple additional figures are:

a. distance from trim stripe {argent/black} to front hood edge w/o hood moulding attached = 1-5/16")

b. corner radius at front of hood - start stripe turn at 3-3/8" from front edge of hood (w/o moulding attached) and make your rollout 3-3/4" from the side edge of the hood to lline up 1-5/16" from front edge of hood.

Cheers, Tom
71 BOSS -  Raven Black / Argent