Author Topic: Boss 302 Engine for sale  (Read 7030 times)

0 Members and 1 Guest are viewing this topic.

Offline hotfords

  • Cool Newbie
  • **
  • Posts: 23
    • http://www.fastspecialties.com
Boss 302 Engine for sale
« on: July 01, 2003, 05:01:55 pm »
1970 Boss 302 Engine for Sale

I still have a complete Boss 302 engine for sale. Anyone interested please drop me a line. triplea360@yahoo.com.

Here is the info :

Original 1970 Ford Mustang Boss 302 Engine. It was removed from a vehicle that was wrecked in the late 70's and has sat inside a nice shop since then. When removed the vehicle only had about 20,000 miles. Casting number on the block is DOZE-6015-B. Date code is 9K14. October 14th, 1969. Early 1970 block. Not included is the distibutor, carburetor, and aircleaner. All other exterior parts are correct, i.e water pump, oil pan, intake, valve covers, thermostat housing, damper, etc. The pistons were replaced with an upgraded replacement piston. Believed to be Ford. This was intended to be put back into another vehicle so there were some upgrades made. In 1983 an aftermarket Crower Cam and Lifters were installed. The cam has .292" lobe lift. 1.73 Rocker Ratio. .505" gross valve lift, intake and exhaust. At some point someone had over tightened the valve cover bolts and cracked the valve covers in three locations. These have been repaired in two of the three locations. These are the correct bolts for the valve covers. The intake is correct but the bolts for the intake are not. Everything else about this engine is untouched. The VIN stamp on the block is 12229. It definately came out of a Boss 302, I knew the vehicle it came from. Not a Cougar. So either the first or last digit of the VIN stamping is light or not there. I can only read the 5 digits there.

Any questions please write to me and I can supply pictures.

In the pics shows an air cleaner, carb and distributor but they are not included and not correct. Just there for display purposes.

Thanks,

AAA

hotfords

Also have a 1970 Boss 302 crate motor for sale still in the crate since 1971.  Bought from a Ford dealership 100% complete.
ttp://rfedd.bigstep.com/sample1.jpg

Offline RichardAnderson

  • Cool Newbie
  • **
  • Posts: 88
Prices?
« Reply #1 on: July 02, 2003, 10:24:49 pm »
Can you post prices on these engines.Thanks,OFO2G106990

Offline hotfords

  • Cool Newbie
  • **
  • Posts: 23
    • http://www.fastspecialties.com
Boss 302 Engine for sale
« Reply #2 on: August 02, 2003, 01:00:59 pm »
Both motors are still available.

Please write for pictures and pricing.

Have a valid email address to write back to, I have had multiple emails from apache@web2.dbinc.com someone names Joe that you cannot respond to.

Thanks,

hotfords
ttp://rfedd.bigstep.com/sample1.jpg

Offline hotfords

  • Cool Newbie
  • **
  • Posts: 23
    • http://www.fastspecialties.com
Boss 302 Engine for sale
« Reply #3 on: August 05, 2003, 08:42:50 pm »
Hello again...

I have been having some email problems but I think I have it under control at this point.

If I haven't got back to you in time, please check your emails, you might have something new.

At this point I do still have both available but I am getting many many responses.

Thanks!

hotfords
ttp://rfedd.bigstep.com/sample1.jpg

Offline hotfords

  • Cool Newbie
  • **
  • Posts: 23
    • http://www.fastspecialties.com
Boss 302 Engine for sale
« Reply #4 on: October 15, 2003, 09:05:11 pm »
AGAIN WHOM EVER IS WRITING ME ABOUT THE ENGINES WITH THE SAME EMAIL AS ABOVE GET A NEW EMAIL ADDRESS... I CANNOT RESPOND TO YOU.  ALL THE EMAILS GET SENT BACK!!!

hotfords
ttp://rfedd.bigstep.com/sample1.jpg

Offline 0T02G136941

  • Newbie
  • *
  • Posts: 6
Boss 302 Engine for sale
« Reply #5 on: October 17, 2003, 09:34:30 am »
I maybe interested, what are you asking for the engins?

Offline bullit

  • Member
  • ***
  • Posts: 178
    • http://community.webshots.com/user/bullit390
price
« Reply #6 on: October 17, 2003, 12:47:08 pm »
what price for the boss motors?

Offline vdavie

  • Cool Newbie
  • **
  • Posts: 59
boss motor
« Reply #7 on: October 22, 2003, 01:23:30 pm »
do you still have the crate motor? if so please send me an e-mail. vdavie@accountingnetwork.com

thanks,
vince